LAUNCH PFP-150 Programming Flash Power with 4 Charging Modes LAUNCH PFP-150 Programming Flash Power is a must tool for vehicle diagnosis. It can prevent failure and abnormal during the process of programming due to low voltage. The applied synchronous rectification improves the efficiency of rectification.   FEATURES 6 Protection Modes : Reverse Protection, Short Circuit Protection, Low Voltage Protection, Overheat Protection, Overcharge Protection, Synchronous Rectification (220V-240V). Normal Mode : Select the charging mode according to the position of vehicle battery (inside or outside). Exhibit Mode : For continual charge with low current in showrooms. Programming Mode : Provide a stable voltage source for the car in need of programming or decoding, ranging from 12V to 16V. Hidden Repair Mode : Indicate whether the battery shold be repaired or not. Work with various batteries, such AGM Battery, GEL Battery, Lithium Battery. SPECIFICATION INPUT VOLTAGE 110V/220V POWER 1800W MAX.CURRENT 150A CHARGING VOLTAGE 12V PROGRAMMING MODE 12~14.8V/2~150A MAH 10~1800Ah DIMENSION 440*410*140(mm) ELECTRIC CABLE LENGTH 3m WEIGHT 9kg read more

read more

LAUNCH i-TPMS The i-TPMS provides professional and comprehensive TPMS services for repair shops to develop their TPMS business. It can program LAUNCH LTR RF sensors for unlimited times to replace OE sensors. The sensor data can be read instantly and accurately, including sensor ID, tire pressure, tire temperature, battery status, etc.   FEATURES 1. The i-TPMS serves over 98% of mainstream vehicles with a TPMS-equipped system available on the market. 2. Experience TPMS service by binding it with an X-431 scanner or using it standalone with the i-TPMS APP. 3. Supports all 315/433MHz sensors. 4. Binding it with an X-431 scanner: Activation, Programming, Relearn and Diagnosing for sensors.     The standalone mode working with the i-TPMS app: Activation and Programming for sensors. 5. Supports unlimited programming for LAUNCH sensors to replace OE sensors.   SPECIFICATION DISPLAY 1.77'', 168''*128 BATTERY 2000mAh OBDII INPUT VOLTAGE 9V ~ 18V DC INPUT VOLTAGE DC 5V WORKING CURRENT ≤1A WORKING TEMPERATURE -10ºC ~ 50ºC STORAGE TEMPERATURE -20ºC ~ 60ºC DIMENSION 252*54*30 mm read more

EG100 EV CLAMP Accurate & Safe & Stable EG100 is a current clamp for the detection of electric vehicles. It needs to be used with Launch scanners for data display side use. The current clamp has small volume, high accuracy and stable performance, and supports AC/DC current test and DC voltage test. FEATURES DC Voltage/Current Testing Designed for EV, and simultaneous measurement of current and voltage. Supports measurement range selection. Supports real-time test value digital display.  Supports maximum, minimum, and peak-to-peak value display. Record and playback the measurement waveform.   AC Current Test Display AC Lower current data. Supports measurement range selection. Supports real-time test value digital display.  Supports maximum, minimum, and peak-to-peak value display. Record and playback the measurement waveform. SPECIFICATION    Best Mode  Clamp CT, non-contact measurement  Battery  9V dry battery  Phase Error  ≤3°(AC 50Hz/60Hz, 23°C±2°C)  Frequency Response  DC-50kHz  Accuracy  ±3%FS(23°C±5°C,＜75%rh)  Jaw Size  φ16mm×18mm (outer diameter of clampable wire)  Input Measuring Range  0-200A AC/DC  Resolution  1mA AC/DC  Output Gear  10mV/A (0~20 A), 100 mV/A(0~200 A)  Working Current  500mA  Working Temperature  0-50°C  Zero Adjustment  The ZERO button can be used for zero adjustment to eliminate  the interference of geomagnetic field and external electric field  Dimension  278*71*37(mm) read more

EM101N EV Oscilloscope & Multimeter The detection and maintenance of the power system is important for new energy vehicles. By viewing the waveform diagram, the maintenance progress can be improved. This product integrates the functions of a multimeter and a dual-channel oscilloscope, which can be used for two purposes. The brand-new diagnostic APP is user-friendly, easy to use and convenient, supports the function of saving and opening waveforms locally. FEATURES Combined with the characteristics of dual-channel oscilloscope and multimeter. The anti-fall rubber sleeve increases the protection of the product, and the unique fuse plug-in design is convenient for replacement. With X-431 diagnostic tool, it can be connected wirelessly or in wired mode, which can be freely selected. With X-431 diagnostic tool, the new UI design supports three display modes, which can be freely switched. Needle sets, multimeter pens, alligator clips, oscilloscope channel test leads, etc. are all available. SPECIFICATION     DC Voltage        Automatic range, test range: ±600V        AC Voltage   Automatic range, test range: ±600V   DC Current  Automatic range, test range: ±10A  (It is necessary to connect an external sensor for large range current.)   AC Current  Automatic range, test range: ±10A. Average value measurement  (It is necessary to connect an external sensor for large range current.)   Resistance  Automatic range, test range: 0~6MΩ   On and off  Tweet when less than 30Ω   Diode  0.5V—2.0V   Battery Capacity  3100mAh   Bandwidth  10MHz   Channel  Two analog channels   Real-time Sampling Rate (Max)  50MHz/s   Time Base Range  1us/div～10s/div, step by 1～2～5 times   Sampling Mode  Normal sampling, peak detection, average   Buffer Memory  1M   Input Coupling  DC, AC, grounded   Input Resistance  1MΩ±2%, Parallel with 15pF±5pF   Vertical Sensitivity  2mV/div～5V/div   Vertical Resolution  8bits   Maximum Input Voltage  40V  peak value（DC + AC peak value）   Probe Attenuation Factor  1X, 10X, 100X（probe support required)   Trigger Type  Edge trigger, pulse width trigger   Trigger Mode  Auto, Normal, Single   Automatic Measurement  Peak-to-peak value, Average value, Maximum value, Minimum value,  Top value, Bottom value, Frequency, Period read more

TLT615D EV Battery Pack Lifting Platform LAUNCH TLT615D is ideal for EV Battery pack replacement and other routine maintenance. This compact lift is designed for room limited workplace, and it is capable of operating safely and efficiently by mechanical safety lock. FEATURES Working for battery-pack removal and used as specialty lifting bracket. Easy to lift and lower with electrical controller, secured by mechanical safety lock. Durable and rigid tubular steel features tear resistance, high abrasion resistance, shock absorption buffer. The maximum lifting weight is 1500kg, and the maximum lifting height is 1850mm. SPECIFICATION   Supply Voltage   AC 220V 50Hz   Operating Voltage   DC 24V   Power   2.2kw   Rated Ligitng Weight   1500kg   Lowest Height   1200mm   Highest Height   1850mm   Platform Width   800mm   Platform Length   1380mm   Ascending Tune   ＜30S   Descending Time   ＜40S   read more