Beta Equipments Trading Sdn Bhd
9 & 11, Jalan Indah 2/14,
Taman Universiti Indah,
43300 Seri Kembangan,
Selangor, Malaysia.
9 & 11, Jalan Indah 2/14,
Taman Universiti Indah,
43300 Seri Kembangan,
Selangor, Malaysia.
+603-8945 6113
+603-8953 8113
+6019-229 8113
+6019-759 6613
+603-8953 8113
+6019-229 8113
+6019-759 6613
ECC03 Current Clamp
| Previous | 17 / 22 | Next |
ECC03
Current Clamp
ECC03 is an AC/DC current clamp designed for non-contact measurement of AC/DC currents up to 400A. It is suitable for 50/60Hz circuits and can be used in conjunction with a multimeter to safely measure current without disconnecting the circuit.
Features
1. Supports two ranges of 40A and 400A, with outputs of 10mV/A and 1mV/A respectively, to meet different current measurement needs;
2. No need to disconnect the circuit, avoid direct contact with high-voltage conductors, and comply with EN 61010 safety standards (CAT II-600V);
3. Equipped with a zero adjustment button to eliminate hysteresis effect during DC measurement;
4. Weighing only 240g, with a maximum jaw opening of 20mm, it is suitable for operation in narrow spaces while supporting the detection of wires of different specifications;
5. LED lights show working status, easy to operate.
Functions
1. AC/DC current measurement: Supports AC (50/60Hz) and DC current detection, with a range of 0-400A.
2. Multi-speed switching: 40A (10mV) and 400A (1mV/A) are optional, suitable for different multimeter ranges.
3. Non-invasive measurement: Readings can be taken by simply clamping the wire without affecting cicuit operation.
Parameters
DC : 40A
DC : 400A
AC : 40A(50/60Hz)
AC : 400A(50/60Hz)
Current Clamp
ECC03 is an AC/DC current clamp designed for non-contact measurement of AC/DC currents up to 400A. It is suitable for 50/60Hz circuits and can be used in conjunction with a multimeter to safely measure current without disconnecting the circuit.
Features
1. Supports two ranges of 40A and 400A, with outputs of 10mV/A and 1mV/A respectively, to meet different current measurement needs;
2. No need to disconnect the circuit, avoid direct contact with high-voltage conductors, and comply with EN 61010 safety standards (CAT II-600V);
3. Equipped with a zero adjustment button to eliminate hysteresis effect during DC measurement;
4. Weighing only 240g, with a maximum jaw opening of 20mm, it is suitable for operation in narrow spaces while supporting the detection of wires of different specifications;
5. LED lights show working status, easy to operate.
Functions
1. AC/DC current measurement: Supports AC (50/60Hz) and DC current detection, with a range of 0-400A.
2. Multi-speed switching: 40A (10mV) and 400A (1mV/A) are optional, suitable for different multimeter ranges.
3. Non-invasive measurement: Readings can be taken by simply clamping the wire without affecting cicuit operation.
Parameters
DC : 40A
| 0~20.00A | ±(3.5%+6digits) |
| 20.00~40.00A | ±(4%+10digits) |
| 0~300.0A | ±(3.5%+6digits) |
| 300.0~400.0A | ±(4.5%+6digits) |
| 0~20.00A | ±(4.0%+10digits) |
| 20.00~40.00A | ±(5%+10digits) |
| 0~300.0A | ±(4.5%+10digits) |
| 300.0~400.0A | ±(5%+10digits) |